For IP address ranges, a similar functionality is available. Unlike at ”Single clients / network settings” you will not enter single devices or network settings, but you can define a range of IP addresses where the IPs will be locked for m23 or where the IPs will be dynamically allotted to devices which are not m23 clients.
-
Lock IP range: Please enter the first and the last IP address into the fields ”First IP” and ”Last IP” and the corresponding network mask (”Netmask”) and click on ”Lock IP range”. All IPs in the indicated range (including the first and the last IP address) will be blocked for m23 and can no longer wrongly be used for m23 clients. The values marked with 1 are required for this function.
-
Add dynamic IP range: Please enter the first and the last IP address into the fields ”First IP” and ”Last IP” and the corresponding network mask (”Netmask”) and the gateway (”Gateway”) and click on ”Add dynamic IP range”. All IPs in the indicated range (including the first and the last IP address) will be allotted dynamically to devices searching for a DHCP server in the network. The values marked with 2 are required for this function.
